HOW CAN YOU USE GUEST NETWORK IN NIGHTHAWK AX3000 4-STREAM ROUTER

  1. Home
  2. AP MODE NETGEAR ROUTER
  3. HOW CAN YOU USE GUEST NETWORK IN NIGHTHAWK AX3000 4-STREAM ROUTER

NIGHTHAWK AX3000 4-STREAM ROUTER (RAX40)

 

NIGHTHAWK AX3000 4-STREAM ROUTER

Nighthawk AX3000 4-Stream router offers the latest generation of wifi 6. Now all your attached devices get the strength of the powerful signals. It also comes with speeds up to 3 Gbps. Here is OFDMA, which also improves the capacity and efficiency of your network. You can also attach many devices, from game consoles to phones. The user can enjoy full entertainment in every corner of the home. It has the best security features. You can also get the 128-bit AES encryption with PSK. There is also WPA3 wifi security protocal.No one can crack the passwords. Now the user can also get the auto- firmware updates. You can also block the websites and keywords. The user can also access the guest network and also use separate and secure passwords. Nighthawk app helps you to manage all your devices from anywhere at any time.


SETUP OF NIGHTHAWK AX3000 4-STREAM ROUTER WITH WEB DOMAIN

 

  • You can also unpack the pack of Nighthawk AX3000 4-Stream router.
  • Here the user can also place the router in the right position.
  • Now the user can also inspect the home network.
  • If there are weak signals, then you can also try to fix it.
  • Unplug the modem too.
  • You can ow attach the power adapter with the router.
  • If the power of the router is not working, then the user can also push the power button.
  • You can now use the ethernet port and attach the modem, laptop, and the router.
  • Launch the web browser.
  • Here you can also write www.routerlogin.net or the IP address is 192.168.1.1
  • Apply the admin for the username and the password as a password.
  • There is a setup wizard on the screen.
  • Now you can also select the country.
  • After this, the user also writes the language and the time.
  • Browse the wifi.
  • If the browsing of the wifi completes, then the user can also enter the wifi.
  • You can now enjoy the voice command on the router.

NIGHTHAWK APP SETUP OF NIGHTHAWK AX3000 4-STREAM ROUTER 

 

  • The user can now open the box of Nighthawk AX3000 4-Stream router.
  • Here the user can also place the router in the right direction.
  • You can now check the signals of the internet.
  • If the signals are weak, then the user can also fix it.
  • Now the user also adds the power adapter with the router.
  • You can see the power of the router is working; if not, then the user can push the routers on/off button.
  • The user can now open the play store on any device. 
  • Nighthawk app is available on all platforms.
  • Download and install it.
  • Open the app now.
  • Type all details of your router.
  • Now scan the wifi.
  • If it does not detect the wifi, then the user can enter the wifi.
  • Your router is ready for use.

LOG IN TO NIGHTHAWK AX3000 4-STREAM ROUTER 

 

  • Launch the web browser.
  • Now the user can also write www.routerlogin.net or the IP address is 192.168.1.1
  • You can now use the username as the admin and the password as the password.
  • The user can also use the features now.

GUEST NETWORK IN NIGHTHAWK AX3000 4-STREAM ROUTER 

 

  • Open the web browser.
  • Now the user can also use www.routerlogin.net, or the IP address is 192.168.1.1
  • You can now use the username as the admin and the password as the password.
  • Go to the advanced settings.
  • Here is the guest network.
  • Now the user tap on it.
  • Enable it.
  • Now the user can also access the guest network.
  • You can also use a separate password for the guest network.
  • The user can also set the limit for internet access.

FIRMWARE UPDATE OF NIGHTHAWK AX3000 4-STREAM ROUTER WITH WEB DOMAIN

 

  • You can now open the web browser.
  • Write www.routerlogin.net or the IP address is 192.168.1.1
  • Now you can also use the username as the admin and the password as the password.
  • Here the user also taps on the advanced settings.
  • Select the firmware update.
  • Hit on it.
  • Set the time for an auto-firmware update.
  • You can now use the latest firmware of your router with security patches.

FIRMWARE UPDATE OF NIGHTHAWK AX3000 4-STREAM ROUTER WITH NIGHTHAWK APP

 

  • Launch the Play store.
  • Now you can also search the Nighthawk app.
  • Download and install the Nighthawk app.
  • Open the app.
  • Now you can also write all details of your router.
  • Click on settings.
  • Then tap on the firmware update.
  • Type the time for auto-update firmware.
  • You can also receive the alert for new release firmware.
  • The user has now used the latest firmware with bug fixes.

SOFT RESET OF NIGHTHAWK AX3000 4-STREAM ROUTER 

 

  • Open the web browser.
  • Now you can also write www.routerlogin.net or the IP address.
  • Here the username is admin and the password as the password.
  • You can now tap on the advanced settings.
  • Tap on the factory reset.
  • It takes only two seconds for the reset process.
  • You can see your router is in default settings.
  • Now the user repeats the same process for setting up of router.

HARD RESET OF NIGHTHAWK AX3000 4-STREAM ROUTER 

 

  • Here is the reset button on the router.
  • Now push the reset button with a paper clip for two seconds.
  • Led lights are flashing.
  • Release the reset button.
  • Led lights are now calm.
  • Your Nighthawk router is also in default settings.
  • Please again set up the router.

 

 

Previous Post
WHAT IS THE METHOD TO USE NETGEAR ARMOR IN NIGHTHAWK AC2300 CYBERSECURITY ROUTER
Next Post
IN WHICH WAY THE USER DO FACTORY RESET IN NIGHTHAWK RAX80 STREAM ROUTER

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu
[elfsight_click_to_call id="1"]